I just had a random thought on Google's Chrome OS announcement, in particular the paragraph on the simple architecture which they are planning on using:
"The software architecture is simple — Google Chrome running within a new windowing system on top of a Linux kernel"
Now if that is the case, where the hell is the Linux Chrome browser launch! I mean they are planning on releasing a full blown Linux based OS running the Chrome browser and we have yet to see an easy to install version of the browser for Linux based distros?
If I am wrong and there is a way to get Chrome working on a Linux distro (preferreably a 64bit version, as this is the way of the future right?) then please let me know where I can get my hands on it.
UPDATE:
Might have to take some of that back... I have just found and installed Chromium for Linux via this Fedora repo - http://spot.fedorapeople.org/chromium/
Also thanks to @jdub for the link to the Ubuntu PPA launchpad site for the Ubuntu nightly builds - https://launchpad.net/~chromium-daily/+archive/ppa
So now I am running Chromium on Linux under Fedora at the moment and will be installing it later tonight/tomorrow under Jaunty too :-)
Tuesday 14 July 2009
Saturday 4 July 2009
Fast playback in Kino on a Pulseaudio system
I have only just found out that the default Fedora 11 install of Kino (when I say "default", it comes from the RPM Fusion repo) has a big problem with audo and hence the playback speed of DV files.
Everything is fine until you hit the platy button. There is no sound and the video plays back at around 10x. I found that the problem is, if Kino has an issue with the audio output device and cannot connect properly then it will try and auto determine the audio sample rate and up the speed of playback to match.
The solution is simple (although not obvious until you find it), you just run Kino through the "padsp" command. This emulates the old /dev/dsp sound device used in ALSA sound systems for the application which it invokes. So running Kino from the command line like this:
padsp kino &
works a treat. Under preferences you can leave the audio device enabled and listed as /dev/dsp and the problem is solved.
As usual with Linux there are a miriade of ways to automated this for launching in the future. You could add this as an alias to your ~/.bashrc file or create a script which launches the command and place it in your ~/bin/ directory. You can come up with your own ways, but I thought the simple way was to just add an alias to my ~/.bashrc file.
alias kino=`padsp kino`
You will have to log out and back in again for this to take effect before you run it.
I hope this helps anyone else out there who is banging their head trying to solve this problem.
Monday 22 June 2009
Mobile email and which way do you go?
I am looking at the alternatives to running an enterprise BlackBerry server for about 15 staff. A relatively small group when I think about it and wonder how others deal with "enterprise" mobile email solutions. It is important that the mobile email solution is reliable and easy to use, but I would like to move forward and *open* the communications platform.
By open I mean that the solution needs to be able to lend itself to mulitple client scenarios. Staff need the same access on the desktop in the office, mobile device when in transit/meetings and just generally on the Internet with access to a web browser (mothers, brothers, sisters houses) when needed and available. Using an open standards and open source solution would be a real benefit and bonus as well!
So to this end it would be great if you could provide a quick pick answer to this question via this poll
By open I mean that the solution needs to be able to lend itself to mulitple client scenarios. Staff need the same access on the desktop in the office, mobile device when in transit/meetings and just generally on the Internet with access to a web browser (mothers, brothers, sisters houses) when needed and available. Using an open standards and open source solution would be a real benefit and bonus as well!
So to this end it would be great if you could provide a quick pick answer to this question via this poll
Friday 12 June 2009
Australian Optus HTC Dream update to Cupcake
This is my account of how I got the official US version as released via OTA updates to T-Moble HTC Dream handsets installed on my Optus HTC Dream. Most of the credit goes to the XDA Developer site and I will reference those pages below. ( The XDA developer site is currently down for me??, so I will update those when I can get access again)
I performed all of this process from a Linux system. If you do not have a Linux machine to do this from then I have seen many people do the same thing from Windows and Mac machines, but my instructions will be farily Linux specific. You can download and use almost any of the modern Linux distros in live preview mode to perform the same steps and use the same commands that I have here.
The whole process takes about 20 mins if you just run straight through ;-)
Disclaimer : I take no responsibility for any damage you may inflict on your device or anything else in close proximity while performing the update.
There are a few files you will need on hand before you get started. I have made the ones I used available here, using the file names I used on the process. There are links to the originals as well if you feel safer getting them from there.
1. Connection and backup
Plug the phone into your PC. Mount the device and just copy all the files from the SD into a directory on your PC. The first ROM update will erase all your installed applications from the phone (you have been warned - this is the first warning) and the next step involves formatting (erasing) all content from the SD card - hence this backup.
2. Formatting the SD card
This will show you all mounted filesystems of type "vfat". You may have more than one on your system, but it should be listed as mount "on /media/Cxxx-xxxx" or something similar.
You will need to unmount this drive, but not disconnect the device. To ensure that when you unmount the device but leave it accessible by the operating system it is best done from the command line
You should now still be able to access the device to be able to change the format of the partition and format the device.
This will change the system id of the only partition on the SD card. Now you will need to format this partition as a FAT32 filesystem
Now as a test, unplug the phone USB cable and re-attach. You should be presented with a freshly formatted external drive. There may already be some files on the drive, but they will be as a result of installed applications which automatically create these as needed.
3. Finding and submitting the CID number
You will need a terminal emulator to get this information. The basic, free and easy to use terminal emulator I used was "Terminal Emulator" from "helloandroid.com". You may use any that you wish, they all function essentially the same and prove fine for the following use. You are after a 32 character string, which needs to be reversed and have the final reversed versions first 2 characters replaced with zeros. Here is an example:
To obtain your own CID from the SD card in your G1 you will need to start up the Terminal app and 1st find the directory containing the file. This is slightly different for each of us. So execute the following commands to find and export yours.
Now you will need to submit the reversed and zeroed content of the this file (as demonstrated above) to the GoldImage creation website. Save the attached file which is sent to you from this submission.
4. Writing the images to the SD card
Copy the first image to the root of the SD card. I used the US RC29 image for this step. My guess is that you can also use the EU RC7 image, but as I was aiming towards having the US CRB43 as the final I went with the US here. You can download the file I used from my web site here, or the original where I downloaded it from here.
Once you have this file extract the contents to the root of the SD card. Leaving the name unchanged. The name I had was "DREAIMG.nbh".
Now comes the more difficult part. You will again need to unmount the SD connected drive, but leave the device accessible and write out the goldimage file which you have saved to your PC and called "goldimage.cid" (in my instance). So in line with the above instructions, open a terminal on your PC and enter the following commands:
Now you can disconnect the G1 from the PC and are ready to perform the first ROM flash and changes!
5. Flashing and update - phase 1
You will need to wait while the phone updates and and reboots. You will then be looking at an early release of Android.
To log into your flashed device you will need to add an APN to the phone. For Optus I used the following (only changed settings are listed):
6. Installing Cupcake
You will need to get the latest Cupcake build from the official site here or I have the one used located here from my site.
Once your phone is back up and running. Connect the USB cable and mount the SD card to your PC again. This time you need to copy over the latest version of the Cupcake ROM to the root of the SD card. Really importantly you need to ensure that the file name is correct. It needs to be listed as "update.zip". Here is the command I executed to ensure that I got this right.
Once that is complete, unmount the device from your PC and you are ready for the final install step.
Power off the phone and this time boot by holding down the Home + Power keys. You should boot to a screen with an exclamation mark in a triangle over a ROM. Open the keyboard and press ALT+L to enter the log view mode. Then (following the onscreen instructions) press the ALT+S to run the update.
When this completes, there will be 2 reboots to flash the firmware for radio and system and you will be up and running with Cupcake, as released OTA by T-Mobile in the US.
I am really looking into flashing my phone with a JF release and will apparently need to "root" the device to do this, so stay tuned for a possible further update.
Let me know if you have success or otherwise and of course if there are any bleeding errors in this post.
I performed all of this process from a Linux system. If you do not have a Linux machine to do this from then I have seen many people do the same thing from Windows and Mac machines, but my instructions will be farily Linux specific. You can download and use almost any of the modern Linux distros in live preview mode to perform the same steps and use the same commands that I have here.
The whole process takes about 20 mins if you just run straight through ;-)
Disclaimer : I take no responsibility for any damage you may inflict on your device or anything else in close proximity while performing the update.
There are a few files you will need on hand before you get started. I have made the ones I used available here, using the file names I used on the process. There are links to the originals as well if you feel safer getting them from there.
- US HTC Dream RC29 ROM image - also from here - unzip/extract this file and copy as is to the SD card
- US HTC Dream CRB43 Cupcake 1.5 ROM - also from here - this file will be renamed to update.zip in the copy process
- Your goldcard image file you will need to get from here when shown below.
- Back up all the files on the SD card - cause you may want to keep some of your music and photos etc. for later restore, I know I did!
- Format the SD as a FAT32 filesystem - this will erase everything on it!
- Find the CID number from the SD card
- Reverse and zero this CID
- Visit the goldcard website and submite the altered CID - you will receive an email with the image file attached
- Write the image file to the boot sector of the SD card
- Copy the RC29 image to the root of the SD card
- Power off the phone
- Power on pressing the Camera and Power buttons together
- Press home to continue with the update
- Once installed and rebooted, copy the US Cupcake image to the root of the SD card
- Power off the phone
- Power on pressing the Home and Power buttons together
- Slide open the keyboard and press the ALT + L to view the logging process
- Press the ALT + S to start the update.
- Two reboots later you will be presented with your new Cupcake'ed HTC Dream
- Enjoy!
1. Connection and backup
Plug the phone into your PC. Mount the device and just copy all the files from the SD into a directory on your PC. The first ROM update will erase all your installed applications from the phone (you have been warned - this is the first warning) and the next step involves formatting (erasing) all content from the SD card - hence this backup.
2. Formatting the SD card
This is the second warning - THIS STEP WILL ERASE ALL CONTENT ON YOUR SD CARD!!!!
On my system the SD card was mounted at the /dev/sdb1 mount point. Your mount point may differ. You can use the "mount" command to find out the correct mount point for this step.
mount | grep -i vfat
/dev/sdb1 on /media/C1B4-7B87 type vfat (rw,nosuid,nodev,uhelper=devkit,uid=603,gid=603,shortname=lower,dmask=0077,utf8=1,flush)
/dev/sdb1 on /media/C1B4-7B87 type vfat (rw,nosuid,nodev,uhelper=devkit,uid=603,gid=603,shortname=lower,dmask=0077,utf8=1,flush)
This will show you all mounted filesystems of type "vfat". You may have more than one on your system, but it should be listed as mount "on /media/Cxxx-xxxx" or something similar.
You will need to unmount this drive, but not disconnect the device. To ensure that when you unmount the device but leave it accessible by the operating system it is best done from the command line
sudo umount /dev/sdb1
You should now still be able to access the device to be able to change the format of the partition and format the device.
sudo fdisk /dev/sdb
p (this prints the existing partition table)
t (this selects the change partition id command)
b (this sets the only and therefore selected partition to type VFAT32)
w (this writes out the changes to the partition table and exits the program)
p (this prints the existing partition table)
t (this selects the change partition id command)
b (this sets the only and therefore selected partition to type VFAT32)
w (this writes out the changes to the partition table and exits the program)
This will change the system id of the only partition on the SD card. Now you will need to format this partition as a FAT32 filesystem
sudo mkfs.vfat -F /dev/sdb1
Now as a test, unplug the phone USB cable and re-attach. You should be presented with a freshly formatted external drive. There may already be some files on the drive, but they will be as a result of installed applications which automatically create these as needed.
3. Finding and submitting the CID number
You will need a terminal emulator to get this information. The basic, free and easy to use terminal emulator I used was "Terminal Emulator" from "helloandroid.com". You may use any that you wish, they all function essentially the same and prove fine for the following use. You are after a 32 character string, which needs to be reversed and have the final reversed versions first 2 characters replaced with zeros. Here is an example:
03534453553031458331aca6f70091a6 -> when reversed becomes....
a69100f7a6ac31834531305553445303 -> take each 2digits as a pair and copy them all over in reverse
009100f7a6ac31834531305553445303 -> just alter the first 2 digits to zero
a69100f7a6ac31834531305553445303 -> take each 2digits as a pair and copy them all over in reverse
009100f7a6ac31834531305553445303 -> just alter the first 2 digits to zero
To obtain your own CID from the SD card in your G1 you will need to start up the Terminal app and 1st find the directory containing the file. This is slightly different for each of us. So execute the following commands to find and export yours.
cd /sys/class/mmc_host/
ls -> this will show a directory listing and there will be a directory labelled mmc1:xxxx
cd mmc1:xxxx -> as listed in the above command output
cat cid > /sdcard/mycid.txt -> outputs the CID to the root of your SD card.
ls -> this will show a directory listing and there will be a directory labelled mmc1:xxxx
cd mmc1:xxxx -> as listed in the above command output
cat cid > /sdcard/mycid.txt -> outputs the CID to the root of your SD card.
Now you will need to submit the reversed and zeroed content of the this file (as demonstrated above) to the GoldImage creation website. Save the attached file which is sent to you from this submission.
4. Writing the images to the SD card
Copy the first image to the root of the SD card. I used the US RC29 image for this step. My guess is that you can also use the EU RC7 image, but as I was aiming towards having the US CRB43 as the final I went with the US here. You can download the file I used from my web site here, or the original where I downloaded it from here.
Once you have this file extract the contents to the root of the SD card. Leaving the name unchanged. The name I had was "DREAIMG.nbh".
Now comes the more difficult part. You will again need to unmount the SD connected drive, but leave the device accessible and write out the goldimage file which you have saved to your PC and called "goldimage.cid" (in my instance). So in line with the above instructions, open a terminal on your PC and enter the following commands:
umount /dev/sdb1 -> remember that your mount point may be listed differently
dd -if=~/download/goldcardimage.cd -of=/dev/sdb -> writes the file attached to the goldimage email to the boot sector of your G1
dd -if=~/download/goldcardimage.cd -of=/dev/sdb -> writes the file attached to the goldimage email to the boot sector of your G1
Now you can disconnect the G1 from the PC and are ready to perform the first ROM flash and changes!
5. Flashing and update - phase 1
FINAL WARNING - This will erase all applications (which you can re-install from the Android Market place) and all other phone settings.
Now you can power off the phone. To start the phone hold down together the Camera button and Power button to boot the phone. After a few seconds you should be presented with a screen saying something like "Press home key to update phone" (not sure on the wording, but.....)You will need to wait while the phone updates and and reboots. You will then be looking at an early release of Android.
To log into your flashed device you will need to add an APN to the phone. For Optus I used the following (only changed settings are listed):
APN : yesInternet
Username : *
Password : *
MCC : 505
MNC : 02
APN type : default
Username : *
Password : *
MCC : 505
MNC : 02
APN type : default
6. Installing Cupcake
You will need to get the latest Cupcake build from the official site here or I have the one used located here from my site.
Once your phone is back up and running. Connect the USB cable and mount the SD card to your PC again. This time you need to copy over the latest version of the Cupcake ROM to the root of the SD card. Really importantly you need to ensure that the file name is correct. It needs to be listed as "update.zip". Here is the command I executed to ensure that I got this right.
cp ~/Download/android/signed-kila-ota-148830.de6a94ca.zip /media/C1B4-7B87/update.zip
Once that is complete, unmount the device from your PC and you are ready for the final install step.
Power off the phone and this time boot by holding down the Home + Power keys. You should boot to a screen with an exclamation mark in a triangle over a ROM. Open the keyboard and press ALT+L to enter the log view mode. Then (following the onscreen instructions) press the ALT+S to run the update.
When this completes, there will be 2 reboots to flash the firmware for radio and system and you will be up and running with Cupcake, as released OTA by T-Mobile in the US.
I am really looking into flashing my phone with a JF release and will apparently need to "root" the device to do this, so stay tuned for a possible further update.
Let me know if you have success or otherwise and of course if there are any bleeding errors in this post.
Sunday 24 May 2009
Linux on the desktop...
A recent study of Linux on the desktop suggests that cost is not always the motivating factor in migrating, although it was the most common. Other factors included increased security and decreased ongoing maintenance and support costs.
"The new report “Linux on the Desktop: Lessons from Mainstream Business Adoption,” conducted by Freeform Dynamics and sponsored by IBM, showed that Linux desktops were easier to implement than IT staff expected if they targeted the right groups of users, such as general professional users, who have moderate and predictable use of e-mail and office tools." The report suggests that deployments should be performed based on objective targetting. Rolling out Linux desktops to transaction workers and general professional users is going to create less back lash and resistance to the change in operating software than it would to the more creative, power and mobile professionals.
The report suggests running two operating system platforms (Windows and Linux) would provide the best mix of cost savings and end users acceptance and satisfaction.
I agree with the overall outcomes of the report and have been thinking really hard on a business case which would gain approval and motivate the CEO.....time will tell on that one :-/
"The new report “Linux on the Desktop: Lessons from Mainstream Business Adoption,” conducted by Freeform Dynamics and sponsored by IBM, showed that Linux desktops were easier to implement than IT staff expected if they targeted the right groups of users, such as general professional users, who have moderate and predictable use of e-mail and office tools." The report suggests that deployments should be performed based on objective targetting. Rolling out Linux desktops to transaction workers and general professional users is going to create less back lash and resistance to the change in operating software than it would to the more creative, power and mobile professionals.
The report suggests running two operating system platforms (Windows and Linux) would provide the best mix of cost savings and end users acceptance and satisfaction.
I agree with the overall outcomes of the report and have been thinking really hard on a business case which would gain approval and motivate the CEO.....time will tell on that one :-/
Tuesday 7 April 2009
Australian NSW computer in schools program
After reading the recent article on the AustralianIT website, I had some thoughts and questions on the decisions which have been made.
Now I know there would many reasons why the decision to go wtih Microsoft and Adobe have been made for the NSW school laptop program (hopefully not for Govt kickback $$). But I would like to pose a question. Why not Linux and open source software in general?
The obvious first point is cost $27 million in licensing vs $0. That has to bare some weight right? To move on to some other technical points though...
Wouldn't any forward thinking body, and hopefuly that is what we have as a government in general, be aware of emering technologies and techniques and that the software delivery model (talking cloud and SaaS) is almost at a "Tipping Point". The software community/business model is changing and even the largest internation companies including Sun, Oracle, IBM and Novell are all leaning towards using Linux and open source as the platform and methodology of choice.
While these corporations still continue to charge for enterprise support and maintenance (usually an option is to also run with the unsupported and more *bleeding edge* versions) they are basing their business models on open source software technologies and solutions.
So to put a 6 year old operating system with a completely proprietary graphics suite and office suite together in a bundle to the fastest adopting and quickest learning minds in the country is a bit, dare I say it backwards, to say the least?
Why not position the schools and students in a position to learn with and use the latest technologies in an open arena (which has to be better for educational methodologies) and provide a set of open and standards compliant graphics and office suites which are going to move into more mainstream use in the very near future.
WIth the latest Linux distributions on offer there are a vast array of security and management tools available which provide more than adequate facilities for mass deployment on this scale. The bundled software is of such high standard and quality that is rivals and oftern surpasses that of the few proprietary applications which will be preinstalled and shipped with the selected laptops. There is also the added advantage of the huge repository of other open source applications and developers which can be installed/deployed easily.
So my question is to the powers that be and solutions providers who have made this decision, why, and can you please justify (and I will accept a logical answer to this question) why you have not gone with a predominantly open source solution for the NSW schools laptop program?
Now I know there would many reasons why the decision to go wtih Microsoft and Adobe have been made for the NSW school laptop program (hopefully not for Govt kickback $$). But I would like to pose a question. Why not Linux and open source software in general?
The obvious first point is cost $27 million in licensing vs $0. That has to bare some weight right? To move on to some other technical points though...
Wouldn't any forward thinking body, and hopefuly that is what we have as a government in general, be aware of emering technologies and techniques and that the software delivery model (talking cloud and SaaS) is almost at a "Tipping Point". The software community/business model is changing and even the largest internation companies including Sun, Oracle, IBM and Novell are all leaning towards using Linux and open source as the platform and methodology of choice.
While these corporations still continue to charge for enterprise support and maintenance (usually an option is to also run with the unsupported and more *bleeding edge* versions) they are basing their business models on open source software technologies and solutions.
So to put a 6 year old operating system with a completely proprietary graphics suite and office suite together in a bundle to the fastest adopting and quickest learning minds in the country is a bit, dare I say it backwards, to say the least?
Why not position the schools and students in a position to learn with and use the latest technologies in an open arena (which has to be better for educational methodologies) and provide a set of open and standards compliant graphics and office suites which are going to move into more mainstream use in the very near future.
WIth the latest Linux distributions on offer there are a vast array of security and management tools available which provide more than adequate facilities for mass deployment on this scale. The bundled software is of such high standard and quality that is rivals and oftern surpasses that of the few proprietary applications which will be preinstalled and shipped with the selected laptops. There is also the added advantage of the huge repository of other open source applications and developers which can be installed/deployed easily.
So my question is to the powers that be and solutions providers who have made this decision, why, and can you please justify (and I will accept a logical answer to this question) why you have not gone with a predominantly open source solution for the NSW schools laptop program?
Tuesday 20 January 2009
New Arrival...
Little bit off topic from my normal post and I am going to adjust the categories to reflect a change in postings this year, but first things first.
We are very happy to welcome Andrew Jai Manning to the world. Weighing in at 4.21 kgs (9lb 4oz), 52cm long and 36cm head diameter - he is little bundle of joy number 3 for us!
Cathy and he are doing well after a natural birth (albeit long painful and drawn out) and his 2 elder siblings are besotted with their new little brother.
Some photos are up on our Flickr stream. Short and sweet - that is all for now.
PS - this is a repost after moving the site :(
We are very happy to welcome Andrew Jai Manning to the world. Weighing in at 4.21 kgs (9lb 4oz), 52cm long and 36cm head diameter - he is little bundle of joy number 3 for us!
Cathy and he are doing well after a natural birth (albeit long painful and drawn out) and his 2 elder siblings are besotted with their new little brother.
Some photos are up on our Flickr stream. Short and sweet - that is all for now.
PS - this is a repost after moving the site :(
Subscribe to:
Posts (Atom)